Best Hadco Lighting out of top 18

 

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green - Bronze. Etl listed to us safety standards for wet locations  cetl listed to canadian safety standards for wet locations  manufactured to iso 90012008 standards. Frosted tempered glass lens. 18w maximum s-8 (1141) lamp  lamp is included with fixture  lower wattage lamps are acceptable. Verde green.

 

Hadco Lighting 150 Watt 12 Volt Transformer With Built In Timer And Photoeye-tc152-12tp

Hadco Lighting 150 Watt 12 Volt Transformer With Built In Timer And Photoeye-tc152-12tp

Hadco Lighting 150 Watt 12 Volt Transformer With Built In Timer And Photoeye-tc152-12tp - Warranty ten-year limited warranty.

 

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite - Fiberglass reinforrced polyester composite rockguard with tempered clear glass lens fasteners are stainless steel accessory attaches with set screws to the top of the il336-al and il336-a inground fixtures 6″ (152mm) dia x 1 11/16″ (43mm) tall. 120v.

 

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30 - 75w par30. Verde green.

 

Hadco Lighting BUL16-HS7 BUL16S7 12 Volt Micro Ultem Bullyte with Stake Bronze Lamp Type Not Included

Hadco Lighting BUL16-HS7 BUL16S7 12 Volt Micro Ultem Bullyte with Stake Bronze Lamp Type Not Included

Hadco Lighting BUL16-HS7 BUL16S7 12 Volt Micro Ultem Bullyte with Stake Bronze Lamp Type Not Included - Mounting s7 mounting stake warranty ten-year limited warranty. Manufactured to iso 90012008 standards. Certifications etl listed to u. Gasketing is silicone. Fasteners are 300 series stainless steel. Electrical internal connectors are stainless steel 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105 c, spt-1w wire. Lower wattage lamps are acceptable. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Lamping 35w maximum mr16 bi-pin lamp. Electrical assembly bi-pin socket type (gu5. 20w mr16 shipped if ordered optical assembly clear tempered glass affixed at 10 angle for natural cleaning. Fully rotatable shroud, gasketed, ultem high performance polymer composite. Weight 1. Finish composite is textured, pressure formed, molded-in-color. 16 lb. Width 2 1/8″ (80mm) length 6 1/2″ (165mm) max. Stainless steel retention clip affixed to socket to securely hold lamp in place. Covered mr16 are recommended to protect lamps inner capsule. Cetl listed to canadian safety standards for wet locations. Safety standards for wet locations. 12 volt system requires remote transformer, not included. 3) with 250 c high temperature teflon coated wire leads. Stainless steel lamp clip is designed to prevent arching of bi-pin and also acts as a heat sync to keep heat away from the socket. Fully-adjustable swivel arm with vibration-proof locking teeth” nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately).   Housing one-piece injection molded ultem high performance polymer composite. S. The wires are permanently fused to the clip.

 

Hadco Lighting 1010-H Hadco Lighting 1010-H Beacon Bronze120V 120V

Hadco Lighting 1010-H Hadco Lighting 1010-H Beacon Bronze,120V 120V

Hadco Lighting 1010-H Hadco Lighting 1010-H Beacon Bronze,120V 120V - Hid is 4kv rated medium base porcelain socket with nickel-plated screw shell and center contact.   Removable roof for easy relamping.   Note the base has two (2) ½” npt conduit entrances for connection to the power source.   Fluorescent ballast is core and coil, npf class b. Check with local authorities before specifying alternate voltages. Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation.   Molded silicone gasket seals glass, top and bottom, and prevents moisture intrusion into the fixture. Potting compound must be used to seal the conduit wire entry. 13w fluorescent socket is a gx23/gx23-2.   Lower housing may be recessed directly in the ground or in concrete. Optical assembly clear borosilicate glass refractor lens. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.   Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. Note all ballasts are eisa / title 20 / title 24 compliant where applicable.   Fasteners are 300 series stainless steel.   Beacons are partially recessed. Ballast is factory wired and tested. Electrical assembly incandescent is medium base porcelain socket with nickel-plated screw shell and center contact. Fluorescent ballast is capable of starting at 0° f or -18° c. Metal halide ballasts are capable of starting at -20° f or -30° c and hps at -40°f or -40°c. Ballasts are factory pre-wired and tested. Ballast all hid ballasts are core and coil and regulated with power factors better than 90% (hpf). Lamping 100w maximum a19 lamp.   Fully gasketed top and bottom.   Housing die-cast aluminum. Installation & mounting voltage caution some local interpretation of the nec section 210-6 only permit the use of 120 volt fixtures when they are mounted below 8′.

 

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze - S. Housing one-piece injection molded polyester resin. Electrical assembly double screw terminal socket. 2 lb. Fully-adjustable swivel arm with vibration-proof locking teeth”½” nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Warranty ten-year limited warranty. Fully rotatable shroud, injection molded polyester resin. Finish composite is textured, pressure formed, molded-in-color. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Width 5 1/8″ (130mm) length 6 3/8″ (162mm) max. Lamping 50w maximum par36 screw terminal lamp. Manufactured to iso 90012008 standards. Lower wattage lamps are acceptable. Fasteners are 300 series stainless steel. 12 volt system requires remote transformer, not included. Certifications etl listed to u. Weight 1. Safety standards for wet locations. Cetl listed to canadian safety standards for wet locations.

 

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer - 12, 13, 14, and 15 volt output taps for design flexibility and longer cable run capability. Housing is 304 brushed stainless steel case with stainless steel screws and lockable captive door, hinged on side weather-proof compartment for plug-in time clock and photo cell. Lifetime limited warranty. The transformer is thermally protected on primary, and secondary side is protected by circuit breaker. 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug.

 

Hadco Lighting Rl4 Large Horizon Pathlyte 12v Stake Included

Hadco Lighting Rl4 Large Horizon Pathlyte 12v, Stake Included

Hadco Lighting Rl4 Large Horizon Pathlyte 12v, Stake Included - The stem is tested for weather- and fade-resistance. The rl4 large horizon pathlyte is a low voltage path lighting fixture from hadco lighting, consisting of a powder-coated, extruded aluminium stem and shade, covering a 20 watt bi-pin lamp. The intensity.

 

Hadco Lighting Mul4_hs7 Mul4 Small Mushroom Pathlyte Low Voltage Bronze

Hadco Lighting Mul4_hs7 Mul4 Small Mushroom Pathlyte Low Voltage Bronze

Hadco Lighting Mul4_hs7 Mul4 Small Mushroom Pathlyte Low Voltage Bronze - Bronze.

 

Hadco Lighting B1-H B1 Small Aluminum Bullyte Bronze without Shroud 100W PARR20

Hadco Lighting B1-H B1 Small Aluminum Bullyte Bronze without Shroud 100W PAR/R20

Hadco Lighting B1-H B1 Small Aluminum Bullyte Bronze without Shroud 100W PAR/R20 - Specifications for powdercoated finisheshousing die-cast aluminum. The bullyte is ideal for use as a garden or backyard, deck or patio spot light. The b1 aluminium bullyte works on the normal line voltage of 120 volts and can power a bulb of up to 100 watts. (Note if hid or r lamp is used, accessory shroud must also be used. Lower wattage lamps are acceptable. Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. The gasket is made of silicone with an optional shroud (for brass finish, the gasket is also in brass, with a fully rotatable shroud). ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. Gasketing is silicone. The swivel arm is fully rotatable and fully adjustable with locking teeth. The b1 bullyte is manufactured by hadco lighting via its fully integrated manufacturing process, where all components and the entire assembly is manufactured in-house, thereby conforming to quality standards. The optical assembly is a part of the optional shroud and this combination must be selected if an incandescent bulb is being used. Incandescent lamp is not included. Fully-adjustable swivel arm with vibration-proof locking teeth. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Fasteners are 300 series stainless steel. The b1 bullyte is mounted on a nps stake with male threading. Optical assembly provided with optional shrouds only. Shroud is optional. Electrical assembly 4kv rated porcelain mini-can base. 70w t4 hid maximum. The b1 small aluminum bullyte, line voltage from hadco lighting is available in verde, speckled stone, black and brass finishes and is made with die cast aluminium (brass for the brass finish) with powder coating (tumble polish and chemical dipping to achieve a patina). Lamping 100w maximum par20/r20 medium base lamp. ).

 

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30 - The light assembly is housed in a polymer composite shroud and is capable of complete 360o horizontal and vertical rotation to give complete operational freedom when focusing the lights. Hadco philips is the preferred lighting brand for residential, commercial, landscape and municipal users and the bu3 composite bullyte accent proves why. The bu3 composite bullyte line voltage accent from hadco lighting are accent lights available in verde, black and bronze finishes with a lamp capacity of up to 75 watts. Light from the lamp is dispersed through a clear tempered glass placed at an angle of 10o to facilitate easy cleaning. A porcelain base socket ensures electrical insulation and safety, even in wet conditions. With a length of 241 mm, the bu3 composite allows for ballast to be either in-ground or above ground.

 

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green - Verde green.

 

Hadco Lighting BU3-H BU3 Composite Bullyte Line Voltage Accent Bronze 75W PAR30

Hadco Lighting BU3-H BU3 Composite Bullyte Line Voltage Accent Bronze 75W PAR30

Hadco Lighting BU3-H BU3 Composite Bullyte Line Voltage Accent Bronze 75W PAR30 - The light assembly is housed in a polymer composite shroud and is capable of complete 360o horizontal and vertical rotation to give complete operational freedom when focusing the lights. Light from the lamp is dispersed through a clear tempered glass placed at an angle of 10o to facilitate easy cleaning. With a length of 241 mm, the bu3 composite allows for ballast to be either in-ground or above ground. Hadco philips is the preferred lighting brand for residential, commercial, landscape and municipal users and the bu3 composite bullyte accent proves why. . The bu3 composite bullyte line voltage accent from hadco lighting are accent lights available in verde, black and bronze finishes with a lamp capacity of up to 75 watts. A porcelain base socket ensures electrical insulation and safety, even in wet conditions.

 

Hadco Lighting RSC2-H-K5-I-E RSC2 Line Voltage Aluminum Step Light Bronze 40W T10 120V

Hadco Lighting RSC2-H-K5-I-E RSC2 Line Voltage Aluminum Step Light Bronze 40W T10 120V

Hadco Lighting RSC2-H-K5-I-E RSC2 Line Voltage Aluminum Step Light Bronze 40W T10 120V - Cast bronze louver is natural cast bronze with frosted tempered glass. Electrical assembly fixture is pre-wired with 18 awg black, white, and ground wires. 18w cfl8w maximum s-8 (1141) lamps (single contact bayonet base). The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels. 64 lb. 1141 lamps use an integral 120v/12v transformer. Lamping 9w pls fluorescent (g23). S. Note- recessed housing contains four (4) ½” nps conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment. The ballast for 9 and 13w cf shall be class b. Cetl listed to canadian safety standards for wet locations. Die-cast aluminum trim ring contains less than 0. 40w maximum t10 (4kv porcelain mini-can base). 3% copper to prevent corrosion in concrete or masonry applications. 3% copper to resist corrosion. Fasteners are 300 series stainless steel. Optical assembly symmetric reflector is precision formed, steel with a white reflective coating. Housing die-cast aluminum back box contains less than 0. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Ada compliant when used in indoor and outdoor wall applications. Width 9″ (229mm) maximum weight 3. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Depth 3 1/2″ (90mm) height 3 1/2″ (90mm) ballast the ballast for 18w cf shall be electronic 50 or 60hz. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Safety standards for wet locations. 13w plc fluorescent (120v- gx23-2 277v- g24q-1). Warranty three-year limited warranty. Lower wattage lamps are acceptable. Manufactured to iso 9001-2008 standards. Zinc-rich primer and thermoset powdercoat for durability. Certifications etl listed to u. Gasketing is silicone.

 

Hadco Lighting Bi2 Bi2 Cast Iron Junction Box - 40605 Nps 120v Hot Dipped Galvanized Cast Iron Junction Box 4

Hadco Lighting Bi2 Bi2 Cast Iron Junction Box – 40605 Nps 120v Hot Dipped Galvanized Cast Iron Junction Box. 4

Hadco Lighting Bi2 Bi2 Cast Iron Junction Box – 40605 Nps 120v Hot Dipped Galvanized Cast Iron Junction Box. 4 - Hot dipped galvanized cast iron junction box 4″ [102mm] square x 3″ high [76mm] with 1/2″ nps [13mm] top inlet two (2) 3/4″ npt [19mm] bottom inlets used with aluminum or composite fixtures. 120v.

 

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v - 50/60hz input. 16 lb. S. Certifications etl listed to u. Exterior mounting, transformer should be mounted on the wall, structure, or post in the vertical position. Manufactured to iso 90012008 standards. Internal transformer is epoxy encapsulated. Safety standards for wet locations. Cable entries should be positioned downward. One (1) 1-1/2″ conduit inlet. Weight 13. 1/2″ knockout on one side for hardwiring or accessory mounting. Cetl listed to canadian safety standards for wet locations. Height 11 3/8″ (289mm) width 6 3/8″ (162mm) depth 5 5/8″ (143mm) max. Consult factory for details. Electrical assembly 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug. Euro-board terminal block for easy low voltage cable attachment. Warranty ten-year limited warranty. Housing housing is dark gray polyester powder-coat formed steel case with stainless steel screws and lockable captive door, hinged on side. Shielded between primary and secondary. Line voltage amperage draw 300va = 2. Four (4) 1/2″ knockouts for low-voltage exit, on bottom of housing. 7 amps. Weather-proof compartment for plug-in time clock and photo cell. 12, 13, 14, and 15 volt output taps for design flexibility and longer cable run capability. Insulation type transformers for safe operation. The transformer is thermally protected on primary, and secondary side is protected by circuit breaker.

 

Hadco Lighting Pl39-ks7 Pl39-ks7 12 Volt 2 Tier Pagoda Path Light With Stake 12v

Hadco Lighting Pl39-ks7 Pl39-ks7 12 Volt 2 Tier Pagoda Path Light With Stake 12v

Hadco Lighting Pl39-ks7 Pl39-ks7 12 Volt 2 Tier Pagoda Path Light With Stake 12v - Stem is extruded aluminum. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Electrical assembly single contact bayonet (s-8). Width 6″ (152mm) maximum weight 3 lb. 12 volt system requires remote transformer, not included. Warranty three-year limited warranty. Manufactured to iso 9001-2008 standards. Height 7″ (178mm). 12 volt fixture is pre-wired with 6-ft. Cetl listed to canadian safety standards for wet locations. S. “” Nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Pigtail of 18-2 awg, 105 c, spt-1w wire. Certifications etl listed to u. Lamping 27w maximum s-8 (1156) lamp. Optical assembly clear tempered glass lens.   Housing die-cast aluminum. Safety standards for wet locations. Finish laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. Lamp is included with fixture. Lower wattage lamps are acceptable.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.